Notice - change of the company's registered office - newly at Rubeška 215/1, 190 00 Prague 9

Production of guidance marking

MEDIALINE warning, indicating and tactile strips

COLAS CZ, a.s. manufactures MEDIALINE warning, indicating and tactile strips. These strips provide indication of areas on the road surfaces for safe guidance of blind or visually impaired persons pursuant to Decree 398/2009 Coll.

The MEDIALINE strip has been certified pursuant to section 2 and 3 of the Government Decree No. 163/2002 Coll.

The warning, indicating and tactile strips and their usage are defined in Annex No. 1 of Decree 398 /2009 Coll.

User properties of the MEDIALINE strips have been assessed by the Centre for Barrier Removal, Sjednocená organizace nevidomých a slabozrakých, Praha 1, Krakovská 21.

MEDIALINE strips have been produced in the Czech Republic since 2006 according to a patented manufacturing process.  The product has been tested by the Institute for Testing and Certification ITC Zlín and a Building Technical Certificate No. AO 224-319/2011/a has been issued.

MEDIALINE is produced from two basic materials:

  • Elastomer – the basic strip
  • Cold cast two-component plastic – tactile bumps

Compared with other products used in tactile modifications for the blind or visually impaired, the MEDIALINE colour is rich white, which creates a strong visual contrast on practically any surface of the pavement. Thus, visually impaired persons with some remaining sight can more easily perceive the tactile modifications.

Application of the MEDIALINE strips does not demand intervention in the surface on which the tactile modifications are installed. There is no noise or dust, which is otherwise produced by removal of the surfaces or storage of the removed materials.

Medialine warning, indicating and tactile strips can be walked on about 30 minutes after application.

On average, two workers can install 60 m2 of these strips, i.e. about 160 pieces, in one shift.

The MEDIALINE strips are produced in two dimensions – 600 x 400 mm and 908 x 420 mm. The products are packed 10 pieces per carton. The strips are applied using a special two-component adhesive based on methacrylate.

In addition to white, the tactile bumps can now also be cast in yellow, black, grey and red.

ADDRESS

COLAS CZ, a.s., Agency HAMP
Kosovská 10, 586 37 Jihlava
e-mail: obalovny@colas.cz, tel.: 567 574 811

Head of Production Jiří Hlaváček 602 587 717 jiri.hlavacek@colas.cz

Attachments

COLAS News

Sep 15

Modernization of the II//208 roadway Hlinky - Bochov

On September 9, 2020, the ceremonial handover of this project and its opening to traffic was held.

Aug 17

COLAS CZ partner of the hike on the Javořice hill

Within the project "Up to the Mountain" (Nahoru na horu), we became a partner again - this year of a hike to the Javořice hill.

Jun 18

Ceremonial opening of the workshop in Jihlava

On June 16th, 2020, the workshop in Jihlava was ceremoniously opened as part of the COLAS Group top management visit.

Jun 16

COLAS is building the road infrastructure for the future mobility development center in the Czech Republic

Colas CZ is currently building the road infrastructure for the Future Mobility Development Center in the western Czech city of Sokolov for the BMW group, as part of a joint venture with Colas Projects.

Jun 15

The most successful construction of road management in the Pardubice region

Reconstruction of the III/322 25 road Černá u Bohdanče I. stage, was nominated in The most successful projects competition. The project was carried out by the Pardubice region under the leadership of J. Neradílek (regional manager), together with Bauser CZ, a.s.

May 11

Change of company headquarters

As of 11 May 2020, a decision was taken by the Board of Directors to change the registered office of COLAS CZ. We look forward to seeing you at the company's new headquarters at Rubeška 215/1, 190 00 Prague 9 - Vysočany.

Navigation

© 2020 COLAS CZ, a.s. All rights reserved